Collection: Fortified Stain and Sealer

Hewbury Paint’s® Fortified Stain & Sealer comes in clear and a variety of colours (Whitewash, Driftwood, Jacobean, Raven).

Available in 250ml and 500ml jars.

Hewbury Paint’s® Fortified Stain & Sealer is specially formulated to provide a translucent hard-wearing finish to your surface. Two coats recommended with drying time in between. No need for additional top coats!

  • Water-based and fast-drying
  • Non-yellowing
  • UV-resistant
  • Can be applied on raw wood or water-based painted surfaces
  • Also suitable for exterior decking

For raw wood, we recommend 220-grit or higher sanded finish prior to applying Fortified Stain & Sealer. The more coats applied, the darker and more opaque the result. 

Application: Brush, sponge. 

Number of coats: 1 - 2

Touch Dry time: 30 minutes at 25°C

Hard Dry time: 90 minutes at 25°C

Re-coat time: 2 hours at 25°C 

Fully Cured:  24 hours at 25°C 

DO NOT apply if temperature is below 10°C, or relative humidity is above 85%.

Avoid painting in extreme cold or hot temperatures, and in high humidity.

Wash up with water.

No products found
Use fewer filters or remove all